The initial studies of radiofrequency microneedling (RFM) were performed by Hantash et al. in 2009. What Hantash was able to demonstrate was that RFM produced a fractionated radiofrequency thermal zone (RTZ) with coagulated tissue surrounded by normal tissue. Overtime, multiple growth factors and inflammatory components led to complete replacement of the RTZ with neocollagenesis and neoelastogenesis over the following 10 weeks.
Delivery of the RFM energy varies according to the device used. Unfortunately, there has been a paucity of solid research behind the majority of the devices. There is confusion in the marketplace for both consumers and providers as to what constitutes the best delivery system for outcomes, safety, and comfort. Lutronic decided to breakdown all the components of RFM energy delivery and optimize them in their development of the Genius.
One of the selling points of many of the devices has been that they are comfortable and have minimal downtime. What this actually means is that there is minimal energy delivered to the dermis. Discomfort is directly related to the amount of energy delivered. Lutronic’s research has shown that needle depths and energy settings don’t necessarily correlate to the what really occurs in the tissues.
Skin intrinsically resists puncture by outside forces. If is especially difficult for 49 needles to penetrate the skin in a small area (1x1cm2). The natural tendency is for the skin to buckle with the needles “bouncing off the surface” and several of the RFM devices tested have been documented to exhibit this phenomenon. Furthermore, needles have a harder time penetrating deeper into tissue than superficially, so deeper depths are even more challenging to accurately place than more shallow treatments. Unfortunately, setting needle depth on the device doesn’t always correlate to actual tissue depth. Requirements for accurate depths include:
- Sharp needles – but not too thin as to bend or dull during hundreds of pulses
- Powerful motor – underpowered motors prevent accurate penetration
- Quick motor – slower motors will lead to pushing the skin rather than penetrate it
One of the fallacies of RFM devices is that higher treatment levels correspond to higher energy delivery. Best results will be related to turning the energy settings “all the way up” is ABSOLUTELY FALSE. Too much energy in too short a period will lead to rapid rises in tissue impedance (resistance) and cut off energy flow immediately. Performance by the operator can affect the energy delivered if handpiece pressure is light or not flush with the skin as well.
Impedance in the dermis is highly variable between patients and even within different areas of the face and body. Variables affecting impedance are: hydration, solar damage, collagen and hyaluronic acid content, and scarring. Using settings based on clinical findings and desired outcomes is not enough precision for optimal energy delivery.
Coated vs Uncoated Needles
Coated (insulated) needles allow the microneedles to penetrate the skin and deliver energy to the dermis while bypassing the heating of the epidermis. Some devices will use uncoated needles which will increase the risk of post inflammatory hyperpigmentation (PIH), particularly in darker skin types. To minimize this risk, uncoated needles use low energies and therefore sacrifice results. There will also be more downtime/wound care with uncoated needles because the skin surface will be more affected than with the coated needles.
The Genius Advantage
- Proprietary needle design – sharp and coated for minimal resistance to insertion
- Improved motor insertion – high torque and quick needle insertion
- Improved protocols – changes to energy and pulse durations to avoid sharp rises in impedance based on Lutronic proprietary research
- Impedance Feedback – the needles monitor tissue impedance every 2 msec and give feedback to the device to optimize energy delivery and adjust flow as resistance changes. This is the “brains” of the Genius.
- Energy delivered feedback – each pulse is monitored and amount of energy delivered is noted. If energy is not exactly as desired/set, both a visual and audible signal is sent to operator. Adjustments in settings or technique can be made to improve energy output.
- Total Treatment Energy – a running total of energy given is kept. This allows the provider to base treatments on energy delivered. Cumulative energies delivered from multiple treatments will become the standard of care to achieve clinical outcomes for a given diagnosis.
With the advancements made with the Genius, suddenly, all other RFM devices are now obsolete. Genius delivers a precise, safe, and efficacious treatment for laxity, wrinkles, neck lines, acne scarring, and hyperhidrosis in all skin types.
Source: Dr. Steve Weiner, Facial Plastic Surgeon Blog